Post-scraping welding line equipment solution
1. The production line is divided into 2 stations. One is the pre-assembly and welding of the spring and bracket. The other is the assembly of brush, accessories and buckle. 2. The equipment is compatible with boneless products with a length ranging from 150mm (6 inches) to 400mm (16 inches). Products of the same series with different lengths only need to adjust the servo motor position parameters. 3. The parts currently considered for production on this line are: There is one type of bracket and buckle, three types of accessories, and only one type of spring and brush, but the length is different (6 inches-16 inches) 4. 150mm (6 inches, inclusive) ~ 400mm (16 inches, inclusive) The whole line beat is ≤6S (equipment operation time, excluding labor). 5. Equipment operation mode: semi-automatic and manual mode 1) Each station can be used separately. 2) All motion actuators can be manually controlled separately. 3) The action of a cycle can be controlled separately. 4) When defective products need to be reworked, manual mode can be selected.
6. The first station of the bottom rack uses 80*80*4mm square tube welding. The second station uses 60*60*4 square tube welding. The aluminum profile used is 45*45 in size with a wall thickness of 2mm. The acrylic plate used is colorless frosted translucent acrylic with a thickness of 4mm.
Equipment efficiency CT: 6S/pcs
Power supply voltage: Single phase: 220V, 50 Hz, 10%.
Three phase: 380V, 50 Hz, 10%. Compressed air: 5±1bar
Working environment Temperature: +5℃~+40℃
Noise: Max: ≤75dBa
